‍

‍

What is an HDMI KVM Extender?

Compared to a regular HDMI extender, an HDMI KVM extender can not only transfer HDMI (Video & Audio) signal but also carry a USB signal to allow you to control a remote device like a PC, NVR, DVR...etc. The distance can vary with different transmission technology, from a hundred meters to a couple of kilometers. This type of extender is typically applied in IT, CCTV, and industrial fields, allowing operators to control a device from distance without entering the centralized data center.

‍

‍

With the max resolution of 4K@30Hz, built-in dual HDMI outputs, and featured audio embedding and extraction functions, HKM01-4K is a low latency HDMI KVM extender that applies AVoIP technology to bring the signals a hundred meters away over the Internet protocol. It also supports 4 USB 2.0 ports at the receiver unit, enabling your ability to use keyboards, mouses, and flash drives to control your remote PC. It's a suitable solution for CCTV, Pro AV, IT, and commercial fields.

‍

Features

• Resolution up to 4K@30Hz
• 140M over CAT6 cable
• 240M using Ethernet Repeater (SR01X)
• 60KM over single-mode fiber cable
• LPCM7.1@192KHZ Audio Format
• Built-in 3.5mm Line-in/ Line-out interface at Tx and Rx

‍

Flexible Audio Applications

‍

‍

USB KVM Transmission

• Built-in 4 USB 2.0 (Type A) ports at Rx unit for USB camera, keyboard, mouse, and flash drive
• Built-in USB-B at Tx unit to connect a host device like a PC (USB-B to A cable is included in the package)

‍

Built-in Extra HDMI Output on Local End

The extra HDMI output allows you to monitor an NVR, DVR, or PC on the local end without using an HDMI distributor.

‍

Multiple Ways of Control

• IR Remote
• RS232 Commands
• USB

‍

What's in the Box

• HKM01T-4K (Transmitter Unit)
• HKM01R-4K (Receiver Unit)
• USB-A to B Cable
• IR Emitter
• Accessory Bag (Screws, Screw Plugs, Rubber Pads)

‍