Help
Chat
ข้อมูลติดต่อกลับ

ชื่อ :

เบอร์ :

คุณต้องการติดต่อเรื่องใด ?
Hello
01.19 AM
Hello sir,
May I help you ?

Rugged 6x 10/100TX (RJ-45) + 2x 1000SX (Multi-Mode / SC)

#IES-A3062GF-MM-SC

฿40,000.00 | In stock 1

Models:

Series:

Description

IES-A3062GF series are managed Ethernet switches with 6x10/100Base-T(X) and 1000Base-SX or 1000Base- LX ports which is specially designed for the C1D2/ATEX certified with hazardous locations requirements. IES-A3062GF series support redundant power input and surge protection. The wide operating temperature range from -40°C to 70°C and C1D2/ATEX certified can satisfy most of operating environments.   IES-A3062GF Series can be managed centralized and convenient by a powerful windows utility — Open-Vision. In addition, the wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for highly-managed Fiber Ethernet application.

Specification

  
Physical Ports 
Fiber Ports Number2
Fiber Ports Standard1000Base-SX
Fiber ModeMulti-mode
Fiber Diameter (μm)62.5/125 μm
50/125 μm
Fiber Optical ConnectorSC
Fiber Ports Specifications Typical Distance (km)0.55 km
Wavelength (nm)850 nm
Max. Output Optical Power (dBm)-4 dBm
Min. Output Optical Power (dBm)-9.5 dBm
Max. Input Optical Power(Saturation0 dBm
Min. Input Optical Power (Sensitivity)-18 dBm
Link Budget (dB)8.5 dB
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX6
Technology  
  Ethernet StandardsIEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX 
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3ad for LACP (Link Aggregation Control Protocol )
IEEE 802.3x for Flow control 
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging 
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) 
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
MAC Table8192 MAC addresses
Priority Queues4
ProcessingStore-and-Forward
Switch PropertiesSwitching latency : 7 μs 
Switching bandwidth : 5.2Gbps
Max. Number of Available VLANs : 4096 
IGMP multicast groups : 1024 
Port rate limiting : User Define
Security FeatureEnable/disable ports, MAC based port security 
Port based network access control (802.1x) 
VLAN (802.1q ) to segregate and secure network traffic 
Supports Q-in-Q VLAN for performance & security to expand the VLAN space 
Radius centralized password management 
SNMPV1/V2c/V3 encrypted authentication and access security
Software FeaturesSTP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic 
VLAN (802.1Q) with VLAN tagging and GVRP supported 
IGMP Snooping for multicast filtering 
Port configuration, status, statistics, monitoring, security 
SNTP for synchronizing of clocks over network 
Support PTP Client (Precision Time Protocol) clock synchronization
DHCP Server / Client support
Port Trunk support
MVR (Multicast VLAN Registration) support
Network RedundancyO-Ring
Open-Ring
STP
Warning / Monitoring SystemRelay output for fault event alarming 
Syslog server / client to record and view events 
Include SMTP for event warning notification via email 
Event selection support
RS-232 Serial Console PortRS-232 in RJ45 connector with console cable. Baud rate setting: 9600bps, 8, N, 1
LED Indicators  
Power IndicatorGreen : Power LED x 3
Fault IndicatorAmber : Indicates PWR1 or PWR2 failure occurred
R.M. IndicatorGreen : Indicates that the system is operating in O-Ring Master mode
O-Ring IndicatorGreen : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port IndicatorGreen for port Link/Act. Amber for Duplex/Collision
10/100/1000Base-T(X) RJ45 Port IndicatorGreen for port Link / Act Amber for 100Mbps indicator
Power  
Redundant Input PowerTriple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack
Power Consumption (Typ.)7 watts
Overload Current ProtectionPresent
Reverse Polarity ProtectionPresent on terminal block
Physical Characteristics  
EnclosureIP-30
Dimensions (W x D x H)52(W)x106.1(D)x144.3(H) mm
Weight (g)740 g
Environmental  
Storage Temperature-40 to 85°C (-40 to 185°F)
Operating Temperature-40 to 70°C (-40 to 158°F)
Operating Humidity5% to 95% Non-condensing 
Regulatory Approvals  
EMIFCC Part 15, CISPR (EN55022) class A,
EMSEN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
ShockIEC60068-2-27
Free FallIEC60068-2-32
VibrationIEC60068-2-6
SafetyEN60950-1, UL 508 (E331061), UL/cUL Class 1 Division 2 Group A/B/C/D, ATEX Class 1 Zone 2

Feature

  • C1D2 and ATEX compliant for harsh industrial environment applications
  • IES-A3062GF series provide 6x10/100Base-T(X) and 2x1000Base-X fiber ports 
  • Triple redundant DC power inputs of terminal block and power jack 
  • Support auto-negotiation and auto-MDI/MDI-X 
  • Support store and forw ard transmission 
  • Support flow control 
  • Rigid IP-30 housing design 
  • DIN-Rail and wall mounting enabled

Reviews

ยังไม่พบการรีวิวสินค้า