IGPS-9084GP-60Wis managedredundant ringPoEEthernet switch with8x10/100/1000Base-T(X)60WattsP.S.E.portsand4x100/1000Base-XSFPports. Theswitch support EthernetRedundancyprotocol, O-Ring (recovery time < 30msover250unitsof connection) and MSTP(RSTP/STPcompatible) canprotect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IGPS-9084GP-60W also support Power over Ethernet, a system to transmit electrical power up to 60 watts, along with data, to remote devices over standard twisted-pair cable inan Ethernet network. EachIGPS-9084GP-60W switch has8x10/100/1000Base-T(X)60WattsP.S.E. (PowerSourcingEquipment)ports. P.S.E. isadevice(switchorhubfor instance) that willprovidepower inaPoEconnection. Andsupport wideoperatingtemperaturefrom -40 o Cto75 o C. IGPS-9084GP-60Wcanalsobe managedcentralizedandconvenientby Open-Vision,Except theWeb-based interface,Telnetandconsole(CLI) configuration. Therefore, theswitchisoneof the most reliablechoiceforhighly-managedandFiberEthernetapplication.

▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring redundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology.

▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and costeffectiveness in one set of network redundancy topology.

▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol.

▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth.

▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number.

▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers.

▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack immediately and completely.

▪ IEEE 1588v2 Technology : The IEEE 1588v2 technology can fulfill precision time synchronization requirements for protection and control applications.

▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks.

▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more.

Filter criteria

Customs Tariff Number

85176200

Applications

Industrial Automation

Ethernet

Gigabit

Ports in total

12

Ports RJ45

08

Ports SFP

04

Ports Fiber

00

POE

P.S.E.

Management

managed

Status

Standard

Manufacturer

ORING

Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy
▪ O-Chain allow multiple redundant network rings
▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function
▪ 8 port Ultra P.S.E. fully compliant with IEEE802.3at standard, provide up to 60 Watts per port
▪ Support PoE on/off scheduled configuration
▪ Support PoE alive check and auto reboot fuction
▪ Support IEEE 1588v2 clock synchronization
▪ Support IPV6 new internet protocol version
▪ Support ModbusTCP protocol
▪ Support IEEE 802.3azEnergy-Efficient Ethernet technology
▪ Provided HTTPS/SSH protocol to enhance network security
▪ Support SMTP client and NTP server protocol
▪ Support IP-based bandwidth management
▪ Support application-based QoS management
▪ Support Device Binding security function
▪ Support DOS/DDOS auto prevention
▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
▪ Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
▪ Support ACL,TACACS+ and 802.1x User Authentication for security
▪ Support 9.6K Bytes Jumbo Frame
▪ Multiple notification for warning of unexpected event
▪ Support DBU-01 backup unit device to quickly backup/restore configuration
▪ Web-based ,Telnet, Console (CLI), andWindows utility (Open-Vision) configuration
▪ Support LLDP Protocol
▪ Rigid IP-30 housing design
▪ DIN-Rail and wall mounting enabled