IP AUDIO SPEAKER(INDOOR 2x10W)
฿7,980.00 | In stock 5
Models:
Series:
Mainly used for voice paging, local sound reinforcement, emergency broadcasting & bell ringing in school classroom, office building, conference room and other indoor environments.
POWER PARAMETERS
| Power Supply: | DC24V/1A |
| Standby Power Consumption: | ≤23W,Idle≤3W |
| Rated Power Output: | 2x10W(8Ω) |
AUDIO PARAMETERS
| Audio Codec: | MP2/MP3/PCM/ADPCM |
| Sensitivity: | |
| Maximum SPL: | |
| S/N (Signal-to-Noise) Ratio: | ≥90dB,200-18KHz |
| Audio Sampling & Bit Rate: | 8kHz～48kHz， 16bit， 8kbps-320kbp |
| THD (Total Harmonic Distortion): | ≤0.3% at 1kHz |
| Frequency Response: | 60Hz-20kHz |
Total harmonic distortion: ≤0.3%，1kHz
NETWORK PARAMETERS
| Network Protocol: | TCP/IP、UDP、ARP、ICMP、IGMP |
| Configuration Method: | Web Interface or DevConfig Tool |
MECHANICAL & ENVIRONMENTAL PROPERTIES
| Mounting Method: Wall-Mounted | |||||||||||||||||||||||||||
| Installation Environment: Dry Indoor Locations Only | |||||||||||||||||||||||||||
| Operatiing Temperature: -0℃~+45℃ (14℉~113℉) | |||||||||||||||||||||||||||
| Storage Temperature: -0℃~+45℃ (-4℉~149℉) | |||||||||||||||||||||||||||
| Operating Humidity: 10%~90% RH non-condensing | |||||||||||||||||||||||||||
| |||||||||||||||||||||||||||
ACCESSORIES
PRODUCT WARRANTY
COMPLIANCE
|
● Wall-mounted design.
● Integrated with network audio decoding, digital amplifier and speaker.
● Adopting high-speed industrial grade dual-core (ARM+DSP) chip, with start-up time ≤ 1 second.
● Built-in Hi-Fi speaker and stereophonic Class-D power amplifier (2×10W/8Ω).
● Equipped with 1×3.5mm Audio Line Input interface which can be connected to external audio source.
● Equipped with 1×3.5mm Audio Line Output interface which can be connected to active speaker.
● Equipped with 1×Amplifier Output interface which can be connected to NAC-301C (10W) auxiliary passive speaker.
● Built-in loop detector to remotely monitor the operating condition of the speaker, easy maintenance.
● Supporting remote volume adjustment of the speaker on the server software.
● Supporting rotary knob volume adjustment of the local audio input.
● Equipped with standard RJ45 interface, accessible to the system wherever Ethernet is available, supporting cross-segment and cross-router.
● Optional: constant voltage backup module (automatically switch from "IP public address" to "analog public address" whenever network anomaly occurs).
● Optional: NAC-301C (10W) auxiliary passive speaker.
● Optional: wireless receiver module & NCS-29 2.4G wireless microphone.
ยังไม่พบการรีวิวสินค้า
