Enterprise Wireless Management Solution with PoE

PLANET WS-2864PVR, an enhanced Wireless AP Managed Switch, features Smart AP control, Layer 3 OSPF/static routing and Intelligent PoE capability to enable service providers and IT managers to control all wireless APs at the same time in medium- and large-scale wireless network environments. The WS-2864PVR provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit Switching engine along with 24 10/100/1000BASE-T ports featuring up to 36-watt 802.3at PoE+, and 4 extra 10 Gigabit BASE-X SFP+ fiber slots. This is definitely the best network solution for a quick, safe and cost-effective AP control with Power over Ethernet for enterprises.

Centralized AP Management for Enterprises

PLANET WS-2864PVR Wireless AP Managed Switch helps service providers and IT managers control all wireless APs at the same time. The WS-2864PVR enables administrators to effectively manage wireless access points deployed in different locations. The administrator can automatically locate, configure, update and monitor all the managed APs through one single browser-based web user interface, without having to configure the wireless APs one by one.

Cost-effective PoE Management Solution with Smart AP Control

The WS-2864PVR, providing 24 10/100/1000BASE-T PoE ports, in-line power interfaces and four 10 Gigabit SFP interfaces, is capable to build a secure and highly-efficient managed wireless network for the enterprises. For instance, it can work with the RADIUS server to perform a comprehensive security for wireless user authentication with powered APs. 

Product Features

Physical Port

• -24 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3af/at PoE+ injector function
• -4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP
• -RS232 RJ45 console interface for switch basic management and setup

Wireless LAN AP Management

• -Dashboard: provides at-a-glance view of system and wireless network status
• -AP Discovery: one key to discover the managed APs on the managed LAN
• -Customized Profile: allows multiple wireless profiles creation and maintenance
• -Auto Provision: multi-AP provisioning with one click
• -Cluster Management: simplifies high-density AP management
• -Zone Plan: optimizes AP deployment with actual signal coverage
• -Analysis: real-time AP status monitoring
• -Scalability: free system upgrade and AP firmware bulk upgrade capability

Power over Ethernet 

• -Up to 24 ports of IEEE 802.3af/802.3at devices powered
• -Supports PoE Power up to 36 watts for each PoE port
• -Auto detects powered device (PD)
• -Circuit protection prevents power interference between ports
• -Remote power feeding up to 100 meters
• -PoE management
  • -Total PoE power budget control
  • -Per port PoE function enable/disable
  • -PoE admin-mode control
  • -PoE port power feeding priority
  • -Per PoE port power limitation
  • -PD classification detection
  • -PoE extend mode control to support power feeding up to a distance of up to 200 meters
• -Intelligent PoE features
  • -Temperature threshold control
  • -PD alive check
  • -PoE schedule
  • -PD scheduled power-recycle

Layer 2 Features

• -Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• -High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• -Storm Control support
  • -Broadcast/Multicast/Unknown unicast
• -Supports VLAN
  • -IEEE 802.1Q tagged VLAN
  • -Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) 
  • -Private VLAN Edge (PVE)
  • -Protocol-based VLAN
  • -MAC-based VLAN
  • -Voice VLAN
• -Supports Spanning Tree Protocol
  • -IEEE 802.1D Spanning Tree Protocol
  • -IEEE 802.1w Rapid Spanning Tree Protocol
  • -IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
  • -BPDU Guard
• -Supports Link Aggregation
  • -802.3ad Link Aggregation Control Protocol (LACP)
  • -Cisco ether-channel (static trunk)
  • -Maximum 14 trunk groups, up to 4 ports per trunk group 
  • -Up to 80Gbps bandwidth (full duplex mode)
• -Provides port mirror (many-to-1)
• -Port mirroring to monitor the incoming or outgoing traffic on a particular port
• -Loop protection to avoid broadcast loops
• -Supports ERPS (Ethernet Ring Protection Switching)
• -Compatible with Cisco uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices
• -Link Layer Discovery Protocol (LLDP)

Layer 3 IP Routing Features

• -Supports maximum 128 static routes and route summarization
• -IP dynamic routing protocol supports  OSPFv2
• -Routing interface provides per VLAN routing mode 

Quality of Service

• -Ingress Shaper and Egress Rate Limit per port bandwidth control
• -8 priority queues on all switch ports
• -Traffic classification
  • -IEEE 802.1p CoS
  • -TOS/DSCP/IP Precedence of IPv4/IPv6 packets
  • -IP TCP/UDP port number
  • -Typical network application
• -Strict priority and Weighted Round Robin (WRR) CoS policies
• -Supports QoS and In/Out bandwidth control on each port
• -Traffic policing  on the switch port
• -DSCP remarking 

Multicast

• -Supports IPv4 IGMP Snooping v1, v2 and v3
• -Supports IPv6 MLD Snooping v1 and v2
• -Querier mode support
• -IGMP Snooping port filtering
• -MLD Snooping port filtering
• -Multicast VLAN Registration (MVR) support

Security

• -Authentication
  • -IEEE 802.1x Port-based/MAC-based network access authentication
  • -Built-in RADIUS client to co-operate with the RADIUS servers
  • -TACACS+ login users access authentication
  • -RADIUS/TACACS+ users access authentication
• -Access Control List
  • -IP-based Access Control List (ACL)
  • -MAC-based Access Control List
• -Source MAC/IP address binding
• -DHCP Snooping to filter untrusted DHCP messages
• -Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• -IP Source Guard prevents IP spoofing attacks
• -Auto DoS rule to defend DoS attack
• -IP address access management to prevent unauthorized intruder

Management

• -IPv4 and IPv6 dual stack management
• -Switch Management Interfaces
  • -Console/Telnet Command Line Interface 
  • -2.4” inch LCD touch screen
  • -Web switch management
  • -SNMP v1 and v2c switch management
  • -SSHv2, TLSv1.2 and SNMPv3 secure access
• -SNMP Management
  • -Four RMON groups (history, statistics, alarms and events) 
  • -SNMP trap for interface Link Up and Link Down notification
• -IPv6 IP Address/NTP/DNS management
• -Built-in Trivial File Transfer Protocol (TFTP) client
• -BOOTP and DHCP for IP address assignment
• -System Maintenance
  • -Firmware upload/download via HTTP/TFTP
  • -Reset button for system reboot or reset to factory default
  • -Dual Images
• -DHCP Relay
• -DHCP Option82
• -User Privilege levels control
• -NTP (Network Time Protocol)
• -Link Layer Discovery Protocol (LLDP) and LLDP-MED
• -Network Diagnostic
  • -SFP-DDM (Digital Diagnostic Monitor)
  • -ICMPv6/ICMPv4 Remote Ping
  • -Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
• -SMTP/Syslog remote alarm
• -System Log
• -PLANET Smart Discovery Utility for deployment management
• -PLANET UNI-NMS (Universal Network Management) and Smart Discovery Utility for deployment management