Device Interface

·         8 x Gigabit PoE+ ports

·         2 x 100/1000Mbps SFP slots

·         6-pin removable terminal block (primary/RPS power inputs & alarm relay output)

·         DIP switches

·         LED indicators

·         Reset button

Data Transfer Rate

·         Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)

·         Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)

·         Gigabit Ethernet: 2000Mbps (full duplex)

Performance

·         Switch fabric: 20Gbps

·         RAM buffer: 128MB

·         MAC address table: 8K entries

·         Jumbo frames: 10KB

·         Forwarding mode: store and forward

·         Forwarding rate: 14.88Mpps (64-byte packet size)

Management

·         HTTP web-based GUI

·         CLI: Telnet / SSHv2

·         SNMP v1, v2c, v3

·         SNMP trap (up to 5 receivers)

·         RMON groups 1/2/3/9

·         Device configuration backup & restore, upgrade firmware, reboot, and reset to default

·         Multiple administrative or read-only user accounts

·         Enable or disable power saving mode per port

·         Static MAC entries

·         LLDP (Link layer discovery protocol)

·         Netlite device map

·         ONVIF device discovery

·         SNTP

·         SMTP alert

·         Syslog

·         Port statistics/utilization

·         Traffic monitor

·         Port mirror: one to one, many to one

·         Storm control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps)

·         Loopback detection

·         DHCP relay/option 82

·         Modbus/TCP

·         SFP DDMI (Digital Diagnostic Monitoring Interface)

·         ERPS (Ethernet Ring Protection Switching) G8032v2

MIB

·         MIB II RFC 1213

·         Bridge MIB RFC 1493

·         RMON (Group 1,2,3,9) RFC 2819 RFC 1757

Spanning Tree

·         IEEE 802.1d STP (spanning tree protocol)

·         IEEE 802.1w RSTP (rapid spanning tree protocol)

·         BPDU filter, guard, and root guard

Link Aggregation

·         Static link aggregation and 802.3ad dynamic LACP (Up to 3 groups)

Quality of Service (QoS)

·         802.1p Class of service (CoS)

·         DSCP (Differentiated Services Code Point)

·         Bandwidth control per port

·         Queue Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair queuing (WFQ)

VLAN

·         802.1Q tagged VLAN

·         MAC-based VLAN

·         Port isolation

·         Up to 256 VLAN groups, ID range 1-4094

Multicast

·         IGMP snooping v1, v2, v3

·         IGMP querier

·         IGMP fast leave

·         Up to 256 multicast groups

·         Static multicast entries

Access Control

·         802.1X authentication (Local user database, RADIUS, guest VLAN assignment)

·         DHCP snooping/screening

·         Trusted host/IP access list for management access

·         Port Security/MAC address learning restriction (Up to 100 entries per port)

·         Static/dynamic ARP inspection

ACL

·         Source/Destination MAC address

·         Source/Destination IP address

·         Source Interface

·         VLAN ID

·         EtherType

·         TCP/UDP port 1-65535

Special Features

·         Netlite device discovery and map display in GUI

·         Port security: MAC address learning restriction per port

·         DHCP relay/option 82 & DHCP server snooping/screening support

·         Wide operating temperature range

·         Redundant power inputs

·         Alarm relay triggered by power failure

·         Surge and ESD protection

Power

·         PWR (Primary) terminal input: 24 – 57V DC

·         RPS (Redundant) terminal input: 24 – 57V DC

·         Compatible power supply: TI-S12024 (120W), TI-S24048 (240W), TI-S48048 (480W) sold separately

·         Max. Consumption: 13W (no PoE load), 253W (full PoE load)

PoE

·         PoE budget: 240W@48V DC input, 124W@24V DC input

·         802.3at: Up to 30W per port

·         PoE Mode A: Pins 1, 2, 3, and 6 for power

·         PoE auto classification

·         PoE port priority/power scheduling/PD alive check

·         Over current/short circuit protection

Terminal Block

·         Redundant power inputs, alarm relay contact, 6 pin

·         Wire range: 0.5 mm^2 to 2.5 mm^2

·         Solid wire (AWG): 12-26

·         Stranded wire (AWG): 12-26

·         Wire strip length: 10-11mm

Dip Switch

Alarm Relay Output

·         Relay output with current carrying capacity of 1A, 24V DC

·         Short circuit mode when one power source is connected

·         Open circuit mode when two power sources are connected

Enclosure

·         IP30 rated metal enclosure

·         Fanless passive cooling

·         DIN-Rail mount

·         Grounding point

·         ESD (Ethernet) Protection: 8KV DC

·         Surge (Power) Protection: 6KV DC

MTBF

·         562,234 hours @ 25° C

·         142,948 hours @ 75° C

Operating Temperature

·         -40° – 75° C (-40° – 167° F)

Operating Humidity

·         Max. 95% non-condensing

Dimensions

·         160 x 120 x 50mm (6.3 x 4.72 x 1.97 in.)

Weight

·         930g (2.05 lbs.)

Certifications

·         CE

·         FCC

·         Shock (IEC 60068-2-27)

·         Freefall (IEC 60068-2-32)

·         Vibration (IEC 60068-2-6)

Warranty

·         Lifetime

PACKAGE CONTENTS

• TI-PG102i
• Quick Installation Guide
• Removable terminal block
• DIN rail mounting bracket