L2+ Management
Provides an easy to use web management interface for traffic management controls such as VLAN, QoS, access controls, link aggregation, troubleshooting, SNMP monitoring, and per port MAC restriction.
12-Port Hardened Industrial Gigabit PoE+ Layer 2+ Managed DIN-Rail Switch
฿60,800.00 | In stock 1
Models:
Series:
TRENDnet's Industrial Gigabit L2+ Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced traffic controls to meet the evolving demands of today's SMB networks. Each industrial layer 2 managed switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance fiber networking applications.
These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet industrial layer 2 managed switch supports advanced traffic management controls, troubleshooting, and SNMP monitoring. Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring making each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks.
Provides an easy to use web management interface for traffic management controls such as VLAN, QoS, access controls, link aggregation, troubleshooting, SNMP monitoring, and per port MAC restriction.
A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling.
Equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments.
.png)
8 x Gigabit PoE+ ports, 4 x Gigabit SFP slots allow for a 24Gbps switching capacity, and 1 x console port (RJ-45 to RS-232) for out-of-band management
Supplies up to 30W of PoE+ power per port with a 240W power budget
Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling
Managed features include 802.1Q / Q-in-Q / GVRP / MAC & Protocol-Based VLAN, IGMP v1 / 2 / 3, IGMP Snooping, MLD, MVR, per port bandwidth control / 802.1p / DSCP / Queue Scheduling (SPQ / WRR), STP / RSTP / MSTP spanning tree, static and dynamic link aggregation, Xpress Ring, and ERPS for flexible network integration
Offers IPv4 / IPv6 static or DHCPv4 / v6 assignment, IPv4 / IPv6 static routing and proxy ARP, DHCP server / relay / option 82, and DHCP server snooping / screening to filter out unauthorized DHCP servers
Managed access control featues include ACLs, IP-MAC-Port binding, ARP inspection, 802.1X RADIUS, MAC address learning, DHCP snooping and IP Source Guard provides layered network access controls
Monitoring features include SNMP v1 / v2c / 3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, SFP DDMI, and ModBus / TCP
IP30 rated metal enclosure with integrated DIN-Rail mounting hardware
24Gbps switching capacity
Dual power inputs with overload current protection (power supply sold separately: TI-S48048)
Alarm relay output triggered by power failure of primary and/or redundant power
Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance
A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in extreme hot or cold environments
Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)
Grounding point protects equipment from external electrical surges
|
Standards |
·
IEEE
802.1d ·
IEEE
802.1p ·
IEEE
802.1Q ·
IEEE
802.1s ·
IEEE
802.1w ·
IEEE
802.1X ·
IEEE
802.1ab ·
IEEE
802.1ax ·
IEEE
802.3 ·
IEEE
802.3u ·
IEEE
802.3x ·
IEEE
802.3z ·
IEEE
802.3ab ·
IEEE
802.3ad ·
IEEE
802.3az ·
IEEE
802.3af ·
IEEE
802.3at |
|||||||||||||
|
Device Interface |
·
8 x
Gigabit PoE+ ports ·
4 x
Gigabit SFP slots ·
1 x
Console port (RJ-45) ·
1 x
USB Port (firmware update, logs, configuration) ·
6-pin
removable terminal block (primary/RPS power inputs & alarm relay output) ·
DIP
switches ·
LED
indicators ·
Reboot
button |
|||||||||||||
|
Data Transfer Rate |
·
Ethernet:
10Mbps (half-duplex), 20Mbps (full-duplex) ·
Fast
Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) ·
Gigabit
Ethernet: 2000Mbps (full duplex) ·
SFP:
2000Mbps (full duplex) |
|||||||||||||
|
Performance |
·
Switch
fabric: 24Gbps ·
RAM
buffer: 512MB ·
MAC
address table: 16K entries ·
Jumbo
frames: 10KB ·
Forwarding
mode: store and forward ·
Forwarding
rate: 17.9Mpps (64-byte packet size) |
|||||||||||||
|
Management |
·
HTTP
web-based GUI ·
CLI:
Telnet / SSHv2 ·
SNMP
v1, v2c, v3 ·
SNMP
trap (up to 5 receivers) ·
RMON
groups 1/2/3/9 ·
Device
configuration backup & restore, upgrade firmware, reboot, and reset to
default ·
Multiple
administrative or read-only user accounts ·
Enable
or disable power saving mode per port ·
Static
MAC entries ·
LLDP
(Link layer discovery protocol) ·
Netlite
device map ·
ONVIF
device discovery ·
SNTP ·
SMTP
alert ·
Syslog ·
Port
statistics/utilization ·
Traffic
monitor ·
Port
mirror: one to one, many to one ·
Storm
control: Broadcast, multicast, destination lookup failure (Min. limit: 1pps) ·
Loopback
detection ·
DHCP
relay/option 82 ·
Xpress
Ring ·
ERPS
(Ethernet Ring Protection Switching) G8032v2 ·
SFP
DDMI (Digital Diagnostic Monitoring Interface) |
|||||||||||||
|
MIB |
·
MIB
II RFC 1213 ·
Bridge
MIB RFC 1493 ·
RMON
(Group 1,2,3,9) RFC 2819 RFC 1757 |
|||||||||||||
|
Spanning Tree |
·
IEEE
802.1d STP (spanning tree protocol) ·
IEEE
802.1w RSTP (rapid spanning tree protocol) ·
IEEE
802.1s MSTP (multiple spanning tree protocol) ·
BPDU
filter, guard, and root guard |
|||||||||||||
|
Link Aggregation |
·
Static
link aggregation and 802.3ad dynamic LACP (Up to 3 groups) |
|||||||||||||
|
Quality of Service (QoS) |
·
802.1p
Class of service (CoS) ·
DSCP
(Differentiated Services Code Point) ·
Bandwidth
control per port ·
Queue
Scheduling: strict priority (SP), weighted round robin (WRR), weighted fair
queuing (WFQ) |
|||||||||||||
|
VLAN |
·
802.1Q
tagged VLAN ·
MAC-based
VLAN ·
Port
isolation ·
Up
to 256 VLAN groups, ID range 1-4094 |
|||||||||||||
|
Multicast |
·
IGMP
snooping v1, v2, v3 ·
IGMP
querier ·
IGMP
fast leave ·
Up
to 256 multicast groups ·
Static
multicast entries |
|||||||||||||
|
Access Control |
·
802.1X
authentication (Local user database, RADIUS, guest VLAN assignment) ·
DHCP
snooping/screening ·
Trusted
host/IP access list for management access ·
Port
Security/MAC address learning restriction (Up to 100 entries per port) ·
Static/dynamic
ARP inspection |
|||||||||||||
|
ACL |
·
Source/Destination
MAC address ·
Source/Destination
IP address ·
Source
Interface ·
VLAN
ID ·
EtherType ·
TCP/UDP
port 1-65535 |
|||||||||||||
|
Layer 3 Features |
·
IPv4
/ IPv6 static routing ·
IPv4
/ IPv6 proxy ARP ·
IP
interfaces: Up to 16 ·
Routing
table entries: Up to 500 (IPv4: 400 / IPv6: 100) ·
DHCP
Relay / Option 82 |
|||||||||||||
|
Special Features |
·
Netlite
device discovery and map display in GUI ·
Port
security: MAC address learning restriction per port ·
DHCP
relay/option 82 & DHCP server snooping/screening support ·
Wide
operating temperature range ·
Dual
redundant power inputs ·
Alarm
relay triggered by power failure ·
Surge
and ESD protection |
|||||||||||||
|
Power |
·
PWR
(Primary) terminal input: 48 – 57V DC ·
RPS
(Redundant) terminal input: 48 – 57V DC ·
Compatible
power supply: TI-S48048 (480W) sold separately ·
Max.
Consumption: 15W (no PoE load); 258W (full PoE load) |
|||||||||||||
|
PoE |
·
PoE
budget: 240W@48V DC input ·
802.3at:
Up to 30W per port ·
PoE
Mode A: Pins 1, 2, 3, and 6 for power ·
PoE
auto classification ·
PoE
port priority/power scheduling/PD alive check ·
Over
current/short circuit protection |
|||||||||||||
|
Terminal Block |
·
Redundant
power inputs, alarm relay contact, 6 pin ·
Wire
range: 0.5 mm^2 to 2.5 mm^2 ·
Solid
wire (AWG): 12-26 ·
Stranded
wire (AWG): 12-26 ·
Wire
strip length: 10-11mm |
|||||||||||||
|
DIP Switch |
|
|||||||||||||
|
Alarm Relay Output |
·
Relay
output with current carrying capacity of 1A, 24V DC ·
Short
circuit mode when one power source is connected ·
Open
circuit mode when two power sources are connected |
|||||||||||||
|
Enclosure |
·
IP30
rated metal enclosure ·
Fanless
passive cooling ·
DIN-Rail
mount ·
Grounding
point ·
ESD
(Ethernet) Protection: 8KV DC ·
Surge
(Power) Protection: 6KV DC |
|||||||||||||
|
MTBF |
·
562,234
499,126 hours @ 25° C ·
142,948
104,194hours @ 75° C |
|||||||||||||
|
Operating Temperature |
·
-40°
– 75° C (-40° – 167° F) |
|||||||||||||
|
Operating Humidity |
·
Max.
95% non-condensing |
|||||||||||||
|
Dimensions |
·
160
x 120 x 50mm (6.3 x 4.72 x 1.97 in.) |
|||||||||||||
|
Weight |
·
964g
(2.12 lbs.) |
|||||||||||||
|
Certifications |
·
CE ·
FCC ·
Shock
(IEC 60068-2-27) ·
Freefall
(IEC 60068-2-32) ·
Vibration
(IEC 60068-2-6) |
|||||||||||||
|
Warranty |
|
PACKAGE CONTENTS |
|
ยังไม่พบการรีวิวสินค้า