PoE Power
A 240W PoE+ power budget supplies up to sixteen Power over Ethernet devices with PoE+ power.
16-Port Hardened Industrial Gigabit PoE+ DIN-Rail Switch
฿35,900.00 | In stock 1
Models:
Series:
TRENDnet's 16-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG160, has sixteen gigabit PoE+ ports with a 240W PoE power budget. Users are able to connect sixteen PoE+ devices to the industrial PoE switch, while still providing two gigabit ports for additional network connections. The industrial PoE switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° – 75° C (-40° – 167° F) for industrial environments.
A 240W PoE+ power budget supplies up to sixteen Power over Ethernet devices with PoE+ power.
The industrial PoE switch features redundant power inputs with output alarm relay.
Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration and shock, and operate within a wide temperature range of -40 – 75° C (-40 – 167° F).
Supplies up to 30W of PoE/PoE+ power per port on the industrial PoE switch with a 240W PoE power budget
Industrial PoE switch with 16 Gigabit PoE+ ports
IP30 rated metal enclosure with included DIN-rail and wall mount hardware
32Gbps switching capacity
Redundant power inputs with overload current protection (power supply sold separately models: TI-S24048 / TI-S48048)
Alarm relay triggered by power failure of primary and/or redundant power
Sends larger packets, or Jumbo Frames (up to 9KB), for increased performance
Industrial PoE switch rated for an operating temperature range of -40 – 75° C (-40 – 167° F)
Rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)
Grounding point on the industrial PoE switch protects equipment from external electrical surges
Standards |
·
IEEE
802.3 ·
IEEE
802.3u ·
IEEE
802.3ab ·
IEEE
802.3x ·
IEEE
802.3af ·
IEEE
802.3at |
Device Interface |
·
16
x Gigabit PoE+ ports ·
6-pin
removable terminal block ·
LED
indicators ·
DIN-Rail
mount ·
Wall
mount ·
Grounding
point |
Data Transfer Rate |
·
Ethernet:
10Mbps (half duplex), 20Mbps (full duplex) ·
Fast
Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) ·
Gigabit:
2000Mbps (full duplex) |
Performance |
·
Data
RAM Buffer: 512KB ·
Switching
Fabric: 32Gbps ·
MAC
Address Table: 8K entries ·
Jumbo
Frame: 9KB ·
Forwarding
rate: 23.8Mpps (64-byte packet size) |
Special Features |
·
Hardened
components rated for extreme temperatures ·
Redundant
power inputs ·
ESD
contact 6kV, air 8kV, and surge 2kV support ·
Low-profile
design |
DC Power |
·
Input:
48 – 56V DC ·
Recommended
power supply: TI-S24048 (sold separately) ·
Max.
consumption: 5.76W (no PoE) |
Optional Power Adapter (48VDC3000 sold
separately) |
·
Input:
100 – 240V AC, 50/60Hz, 2A ·
Output:
48V DC, 3.34A 160W max. |
PoE |
·
PoE
budget: 240W |
Terminal Block |
·
Redundant
power inputs, alarm relay contact, 6 pin ·
Wire
range: 0.34mm^2 to 2.5mm^2 ·
Solid
wire (AWG): 12-24/14-22 ·
Stranded
wire (AWG): 12-24/14-22 ·
Torque:
5 lb. – In / 0.5Nm / 0.56Nm ·
Wire
strip length: 7-8mm |
Alarm Relay Contact |
·
Relay
outputs with current carrying capacity of 1A, 24V DC ·
Open
circuit mode when two power sources are connected ·
Short
circuit mode when only one power source is connected |
MTBF |
·
699,103
hours |
Housing |
·
IP30
metal case ·
DIN-rail
mount ·
Wall
mount ·
Grounding
point ·
6kV
contact protection ·
8kV
air protection ·
2kV
surge protection |
Operating Temperature |
·
-
40° – 75° C (-40° – 167° F) |
Operating Humidity |
·
Max.
95% non-condensing |
Dimensions (L x W x H) |
·
155
x 120 x 48mm (6 x 4.7 x 1.9 in.) |
Weight |
·
500g
(17.7 oz.) |
Certifications |
·
CE ·
FCC ·
Shock
(IEC 60068-2-27) ·
Freefall
(IEC 60068-2-32) ·
Vibration
(IEC 60068-2-6) |
Warranty |
PACKAGE CONTENTS |
|
ยังไม่พบการรีวิวสินค้า
เราใช้คุกกี้เพื่อเพิ่มประสบการณ์ในการเยี่ยมชมเว็บไซต์นี้ อนุญาตคุกกี้เพื่อรับประสบการณ์ที่ดีขึ้น