PoE+ Power
This hardened industrial PoE+ switch features a 240W PoE+ power budget that supplies Power over Ethernet devices with 30W of PoE+ power per port.
16-Port Hardened Industrial Gigabit PoE + DIN-Rail Switch
฿36,900.00 | In stock 1
Models:
Series:
TRENDnet's Industrial Gigabit PoE+ DIN-Rail Switches provide network connectivity in rugged environments, while saving you on installation costs and setup time using Power over Ethernet technology. The Industrial Gigabit PoE+ DIN-Rail Switches each feature a rugged IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating in both high and low temperatures for industrial environments within -40° – 75° C (-40° – 167° F). Our hardened industrial PoE+ switch models feature copper Gigabit PoE+ ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance fiber networking applications.
Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Industrial Gigabit PoE+ DIN-Rail Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. With PoE technology inside these industrial PoE+ switches, users will only need one set of cables to deliver both data and power. Network PoE devices to this hardened industrial PoE+ switch, such as high-power wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more.
This hardened industrial PoE+ switch features a 240W PoE+ power budget that supplies Power over Ethernet devices with 30W of PoE+ power per port.
Multiple power inputs provide redundant power with overload current protection on this industrial PoE+ switch, minimizing network downtime (power supplies sold separately).
Equipped with a rugged IP30 rated housing, designed to withstand a high degree of vibration, shock, and operate within a wide temperature range of -40° – 75° C (-40° – 167° F).
Industrial PoE+ switches supply Power over Ethernet devices with up to 30W of PoE+ power per port
Copper Gigabit PoE+ ports for high-speed device connections with the industrial unmanaged PoE+ switch, and SFP slots that support 1000Base-FX modules for long distance fiber networking applications
Rugged industrial PoE+ switch with IP30 rated metal enclosure, including DIN-Rail mount and wall mount hardware
Multiple power inputs on the industrial PoE+ switches provide redundant power with overload current protection (power supply sold separately, model: TI-S48048)
Alarm relay triggered by power failure of primary and/or redundant power
Supports larger packets, or Jumbo Frames (up to 9KB), for increased performance
A wide operating temperature range of -40° – 75° C (-40° – 167° F) allows for installations in industrial environments with extreme hot or cold conditions
These hardened industrial PoE+ switches are rated for shock (EN 60068-2-27), freefall (EN 60068-2-32), and vibration (EN 60068-2-6)
Complies with industrial EMS certifications (IEC 61000-4-2) ESD: Contact: 6kV | Air: 8kV, (IEC 61000-4-4) EFT: Power: 2kV | Signal: 2kV, (61000-4-5) Surge: Power: 2kV | Signal: 2kV
This industrial PoE+ switch features a grounding point for protection against external electrical surges
Standards |
·
IEEE
802.3 ·
IEEE
802.3u ·
IEEE
802.3ab ·
IEEE
802.3x ·
IEEE
802.3z ·
IEEE
802.3af ·
IEEE
802.3at |
Device Interface |
·
14
x Gigabit PoE+ ports ·
2 x
Gigabit SFP slots ·
6-pin
removable terminal block ·
LED
indicators ·
DIN-Rail
mount ·
Wall
mount ·
Grounding
point |
Data Transfer Rate |
·
Ethernet:
10Mbps (half duplex), 20Mbps (full duplex) ·
Fast
Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) ·
Gigabit:
2000Mbps (full duplex) ·
SFP:
2000Mbps (full duplex) |
Performance |
·
Data
RAM Buffer: 512KB ·
Switching
Fabric: 32Gbps ·
MAC
Address Table: 8K entries ·
Jumbo
Frame: 9KB ·
Forwarding
rate: 23.8Mpps (64-byte packet size) |
Special Features |
·
Hardened
components rated for extreme temperatures ·
Multiple
redundant power inputs ·
ESD
contact 6kV, air 8kV, and surge 2kV support ·
Low-profile
design |
DC Power |
·
Input:
48 – 56V DC ·
Recommended
power supply: TI-S48048 (sold separately) ·
Max.
consumption: 13W (no PoE) |
Optional Power Adapter (48VDC3000 sold
separately) |
·
Input:
100 – 240V AC, 50/60Hz, 2A ·
Output:
48V DC, 3.34A 160W max. |
PoE |
·
PoE
budget: 240W |
Terminal Block |
·
Multiple
power inputs, alarm relay contact, 6 pin ·
Wire
range: 0.34mm^2 to 2.5mm^2 ·
Solid
wire (AWG): 12-24/14-22 ·
Stranded
wire (AWG): 12-24/14-22 ·
Torque:
5 lb. – In / 0.5Nm / 0.56Nm ·
Wire
strip length: 7-8mm |
Alarm Relay Contact |
·
Relay
outputs with current carrying capacity of 1A, 24V DC ·
Open
circuit mode when two power sources are connected ·
Short
circuit mode when only one power source is connected |
MTBF |
·
504,738hrs
@ 50° C ·
222,000hrs
@ 75° C |
Housing |
·
IP30
metal case ·
DIN-rail
mount ·
Wall
mount ·
Grounding
point ·
6kV
contact protection ·
8kV
air protection ·
2kV
surge protection |
Operating Temperature |
·
-
40° – 75° C (-40° – 167° F) |
Operating Humidity |
·
Max.
95% non-condensing |
Dimensions (L x W x H) |
·
155
x 120 x 48mm (6 x 4.7 x 1.9 in.) |
Weight |
·
562g
(19.8 oz.) |
Certifications |
·
CE ·
FCC ·
MET ·
Shock
(IEC 60068-2-27) ·
Freefall
(IEC 60068-2-32) ·
Vibration
(IEC 60068-2-6) |
Warranty |
PACKAGE CONTENTS |
|
ยังไม่พบการรีวิวสินค้า
เราใช้คุกกี้เพื่อเพิ่มประสบการณ์ในการเยี่ยมชมเว็บไซต์นี้ อนุญาตคุกกี้เพื่อรับประสบการณ์ที่ดีขึ้น