Universally suitable for adding high power paging, scheduled loud ringing and background music to a wide range of applications due to its compact housing, modern design and high efficiency.

POWER PARAMETERS

AUDIO PARAMETERS

NETWORK PARAMETERS

INTERFACE SPECIFICATIONS

MECHANICAL & ENVIRONMENTAL PROPERTIES

ACCESSORIES

PRODUCT WARRANTY

COMPLIANCE

» EASY CONFIGURATION

After connecting the amplifier to the existing LAN/WAN network, you can easily manage and configure the amplifier using its own user-friendly configuration web interface accessible via the amplifier's IP address, no need of tricky programming.

When you first log into the web GUI, after setting the IP address of the server (the PC on which SPON™ XC-9000 software was installed), you can either manually assign a static IP address to the amplifier, or choose DHCP to obtain dynamic IP address for the amplifier. Apart from the settings of network parameters, you can also use the web GUI to configure other parameters of the amplifier such as FTP server, offline broadcasting volume, line input sensitivity, line input ACG (Automatic Gain Control), network adaptability, electrical output voltage (70V/100V), web interface login username & password, firmware upgrade, etc.

» INTEGRATED AMPLIFIER

Apart from the all network-attached features, this amplifier is also an integrated amplifier with multiple components built into one box:
● A power amp to drive the passive speakers.
● A preamp to provide mic inputs for external condenser microphone, aux inputs for external audio source equipments such as CD/MP3 player or AM/FM tuner, aux output for adding separate legacy analog amplifier to the system for more power.
● Volume control, tone control, input switching, phono EQ, etc.

The use of integrated amplifier allows you to save space on your rack without sacrificing power or capability, everything can be easily controlled on the web interface and a few knobs on the rear panel of the amplifier.

» CONSTANT-VOLTAGE AMPLIFIER

For PA system or paging system, an amplifier is often used to drive many passive speakers through long wire runs (over 50 ft), in that case, the most effective way to minimize resistive power loss is to use a constant-voltage amplifier such as this one.

In comparison to low impedance (4Ω-16Ω) amplifier, a constant-voltage amplifier brings a lot of advantages in designing and installing distributed speakers, especially for the distribution of speakers in large spaces.

The main advantages of using constant-voltage amplifier include:
● Large quantities of passive speakers can be wired in parallel, limited only by available amplifier power output.
● Higher voltage enables longer wire runs between amp and speakers with reduced power loss.
● Low current reduces the required diameter of the speaker wire, meaning smaller gauge wire can be used.
● Parallel connection greatly simplifies speaker impedance calculations, make it easy to design and install the speaker network.
● Different types of speakers with different power requirements can share the same speaker wire at the same time.

» UNIFIED COMMUNICATOIN COMPATIBILITY

This industry-leading amplifier is compatible with standard SIP (RFC3261) protocol, it can be directly registered on mainstream 3rd party VoIP phone system for live paging announcement.



If you want to achieve more advanced functionalities of the amplifier, such as pre-recorded voice announcements, scheduled or event-triggered voice announcements, real-time and timed background music, offline scheduled bell ringing, etc., you'll need to register the amplifier on SPON™ XC-9000 software. But at the same time, if you already have an existing on-premise or hosed/cloud VoIP phone system and would like use your VoIP phone to make live paging announcements to the amplifier, this won't be a problem, you can simply set up an interconnection between your existing VoIP phone system and SPON™ XC-9000 software via SIP trunking, enabling outbound phone calls from your existing VoIP phone to the amplifier.



» LIVE AND PRE-RECORDED VOICE ANNOUNCEMENTS

You can easily make live voice announcements to the amplifier from 3rd party VoIP phone, SPON™ XC-9038 IP paging console, headset connected to the server PC (using the real-time capture & playback function of SPON™ XC-9000 software) or even your smartphone with SPON™ XC-APP mobile app.



As for pre-recorded voice announcements, you can either choose to upload the pre-recorded voice announcement MP3/WAV audio files on the media library of SPON™ XC-9000 software, or simply put the audio file in a USB flash drive and play the audio file on SPON™ XC-9038 IP paging console.

» SCHEDULED VOICE ANNOUNCEMENTS

With the help of SPON™ XC-9000 software, you'll be able to broadcast the right voice message at the right time.

This innovative amplifier has the functionality of scheduled voice announcements, you can simply set up a scheduled voice announcement task on SPON™ XC-9000 software (please check the detailed setup procedures as below). After the setup of the task, the corresponding pre-recorded voice announcement will be played from the amplifier to the connected passive speakers at the specified time.

Detailed Setup Procedures of Scheduled Voice Announcement Task:
① Creat a new scheme on SPON™ XC-9000 software and rename it as "Scheduled Voice Announcement".
② Creat a new task in the new scheme.
③ Set the trigger of the new task to be [Timer], set the period type to be [Daily]/[Weekly]/[Once], and set the start & end date as well as the execution time of the task.
④ Set the operation of the new task to be [PA], set the audio source type to be [File], choose the corresponding pre-recorded voice announcement MP3/WAV audio file in the media library, and choose the designated amplifier as the target endpoint.

» REAL-TIME AND TIMED BACKGROUND MUSIC

After registering the amplifier on SPON™ XC-9000 software, there're multiple different ways to initiate real-time background music to the amplifier:
● Play music via connected audio source equipments (such as CD player, AM/FM radio tuner, cassette player, etc.) on your PC with real-time capture & playback function of SPON™ XC-9000 software.
● Play music via music streaming service (such as Spotify, Apple Music, YouTube Music, etc.) on your PC with real-time capture & playback function of SPON™ XC-9000 software.
● Play the pre-uploaded music files in the media library of SPON™ XC-9000 software on your PC.
● Play the pre-stored music files in the connected USB flash drive on SPON™ XC-9038 IP paging console.
● Play music via music streaming service (such as Spotify, Apple Music, YouTube Music, etc.) on your smartphone/tablet/laptop and connect your device to the line input (3.5mm TRS jack) of SPON™ XC-9038 IP paging console.
● Play local music files via SPON™ XC-APP mobile app on your smartphone/tablet/laptop.



As for timed background music, you can simply set up a timed background music task on SPON™ XC-9000 software (please check the detailed setup procedures as below). After the setup of the task, the corresponding background music will be played from the amplifier to the connected passive speakers at the specified time.

Detailed Setup Procedures of Timed Background Music Task:
① Creat a new scheme on SPON™ XC-9000 software and rename it as "Timed Background Music".
② Creat a new task in the new scheme.
③ Set the trigger of the new task to be [Timer], set the period type to be [Daily]/[Weekly]/[Once], and set the start & end date as well as the execution time of the task.
④ Set the operation of the new task to be [PA], set the audio source type to be [File], and choose the corresponding background music MP3/WAV audio file in the media library, and choose the designated amplifier as the target endpoint.

» OFFLINE SCHEDULED BELL RINGING

In actual application, sometimes you might worry that all the preset tasks won't take effect when there's network interruption in your LAN, such concern makes sense since most of the network-attached features of the amplifier is based on SPON™ XC-9000 software, and when the network is interrupted, the amplifier will certainly be offline on the server software.

Well, here I'd like to introduce another great feature of this amplifier that will definitely set you free from the worries of possible network interruption, and this unique feature is commonly referred to as "offline scheduled bell ringing".

In order to ensure that all the preset scheduled voice announcement/timed background music tasks on SPON™ XC-9000 software would still take effect on the amplifier even when the network is interrupted, what you need to do is to export the preset task from the server software and upload the exported "scheduled bell ringing" file to the FTP server of the amplifier. In that way, even when the network is interrupted, the "scheduled bell ringing" tasks uploaded on FTP will still be executed automatically at the specified time.



» FLEXIBLE ZONING OPTIONS

Another big time-saving feature of IP-based paging system is the ability to broadcast different voice announcements/background music to different zones separately.

Each amplifier will be assigned with a unique IP address and a unique SIP account, meaning each amplifier can be addressed individually or grouped into larger zones with other SPON™ IP endpoints. For project sites with multiple amplifiers, with the help of SPON™ XC-9000 software, it's possible to divide the site into different paging zones and target your voice announcements/background music to specific audiences.

After the zoning setup on SPON™ XC-9000 software, the full list of different zones will be displayed on the software platform, SPON™ XC-9038 IP paging console and SPON™ XC-APP mobile app, any specific zone can be chosen while making live/pre-recorded/scheduled/event-triggered voice announcements and real-time/timed background music broadcasting.

In addition, on the platform of SPON™ XC-9000 software, you can easily change the zoning setup remotely, so the paging zones can be reconfigured in real time regardless of physical cabling, this feature would significantly eliminates the unnecessary hassles of going onsite.

» EMERGENCY NOTIFICATION ALERTING

For notification alerting of safety, security and emergency events, the activation can be realized by integrating 3rd party conventional/addressable fire alarm system into SPON™ IP paging system via the amplifier's relay input.

You can easily wire any detection device (such as manual call point, heat/smoke/infrared detector or any other devices with contact closure relay) to the amplifier's realy input (2-pin pluggable terminal block/normally open dry contact) using 24 gauge shielded twisted pair. Custom MP3 audio file can be uploaded to the [Ringtone] folder on the FTP server of the amplifier. As soon as the relay input is triggered by the detection device wired to it, the ringtone uploaded on FTP will be played automatically from the amplifier to the connected passive speakers, making emergency notification alerting simpler and more efficient.

Besides, there's another option for emergency notification alerting. After wiring the detection device to the amplifier's relay input, you can also choose to set up an event-triggered emergency notification task on SPON™ XC-9000 software (please check the detailed setup procedures as below). After the setup of the event-triggered task, whenever the relay input is triggered by the detection device wired to it, the task will be activated automatically and corresponding pre-recorded warning/evacuation voice announcement will be played from the amplifier to the connected passive speakers instantly.